Oki B6100 Technical Manual page 259

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Chute MBF Assy (RRP 4.1.1).
4. Remove the Shaft 14 (RRP 5.1.10).
5. Remove the Gear 14 (RRP 5.1.10).
6. Remove the P/H Assy (RRP 5.1.1).
7. Remove the Spring Regi L (RRP 5.1.6).
8. Remove the Gear Regi Metal (RRP 5.1.7).
9. Remove the Gear Regi Rubber (RRP 5.1.8).
10. Remove the Clutch Regi (RRP 5.1.9).
11. Disengage the left E-ring that secures the Roll Regi Metal (PL5.1.5) to the P/H Assy
(PL5.1.1).
12. Unhook the Spring Torsion (PL5.1.29) from the notch of Chute Upper Assy (PL5.1.6).
13. Move the Spring Torsion to the left from the P/H Assy , avoiding the boss of Bearing Metal R
(PL5.1.31) .
14. Closing the Chute Upper Assy and Chute Inlet (PL5.1.8), align the boss of Bearing Metal R
with the right slit, and draw the Bearing Metal R from the P/H Assy .
15. Closing the Chute Upper Assy and Chute Inlet , align the boss of Bearing Metal (PL5.1.13)
with the left slit, and draw the Bearing Metal from the P/H Assy .
16. Draw upward the right shaft of Roll Regi Metal from the right bearing of P/H Assy .
17. Draw diagonal rightward the Roll Regi Metal together with Chute Upper Assy and Chute Inlet
from the P/H Assy .
18. Remove the Bearing Rubber R (PL5.1.17) that secures the Roll Regi Rubber to the P/H Assy .
19. Remove the Bearing Rubber L (PL5.1.18) that secures the Roll Regi Rubber to the P/H Assy .
20. Moving the Roll Regi Rubber to the right from the P/H Assy , draw the left shaft of Roll
Regi Rubber from the left bearing bore of P/H Assy .
21. Draw upward the right shaft of Roll Regi Rubber from the bearing of P/H Assy , and draw
diagonal rightward the Roll Regi Rubber from the P/H Assy .
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
RRP 5.1.2 Roll Regi Rubber (PL5.1.7) continued
Removal and Replacement Procedures (RRPs)
10-105