General Specifications - Oki B6100 Technical Manual

Printer Specifications

General Specifications

Category
Printing method
Exposure method
Laser specifications
Resolution
Fuser method
Warm-up time
Power supply
Power consumption
Size and weight (not including the
CRU, PWB ESS or any options)
Space requirements
Maximum paper size
Maximum printable area
Maximum paper load
Operating environment with CRU
15-2
Section - 15 Printer Specifications
Electro-photographic system (roller charging, single compo-
nent magnetic toner development)
Semiconductor Laser Beam Scanning
Class 1 Laser Product
Class 3B Laser, rated at 5mW output @ 780nm
600/1200 dots per inch (dpi), switchable at full engine speed.
Heat and pressure
From a cold start (22°C ambient temperature) to READY TO
PRINT within 70 seconds.
100/120VAC (90~140VAC) 50/60Hz (47Hz ~63Hz)
220/240VAC (198~264VAC) 50/60Hz (47Hz ~63Hz)
100/120VAC printer: Maximum consumption: 800W Running,
45 W Sleep, Maximum current: 8A (100VAC)/6.66A (120VAC).
240VAC printer: Maximum consumption: 800W Running,
45W Sleep. Maximum current: 3.33A (240VAC).
Note: No electrical current is supplied to the Fuser Assy in
Sleep Mode.
Width 422mm X Depth 439mm X Height 413mm
Front: Minimum 240mm
Back: Minimum 300mm
Sides: Minimum 200mm
Legal 14" (8.5"X14" = 355.6mmX215.9mm)
Entire page except a 4mm border on all four sides
550 sheets of RX 80 A4 (3R91805) paper, or Xerox 4200lb
Letter size paper.
5 ~ 35°C @ 15% to 85% RH (operating)
0 ~ 3,100 meter above sea level
Horizontal bias within 5° of level
OKI B6100 Laser Printer - Base Engine Technical Manual
Specification
Version 1.0