Oki B6100 Technical Manual page 189

Removal
1. Remove the Cover Assy Rear Face Up (RRP 1.2.3).
2. Remove the two screws securing the Chute Assy Face Up to the Cover Assy Rear .
3. Remove the Chute Assy Face Up from the Cover Assy Rear .
Replacement
1. Engage the right hole in the Chute Assy Face Up with a boss of Arm Direction (PL1.2.6) on
the Cover Assy Rear (PL1.2.5).
2. Adjust the Chute Assy Face Up to the setting position of the Cover Assy Rear Face Up,and
then fasten it by both screws.
3. Mount the Cover Assy Rear Face Up (RRP 1.2.3).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
RRP 1.2.4 Chute Assy Face Up (PL1.2.8) continued.
Removal and Replacement Procedures (RRPs)
10-35