RRP 5.1.10 Shaft 14 (PL5.1.34) and Gear 14 (PL5.1.35) continued
Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Chute MBF Assy (RRP 4.1.1).
In the following steps, take care not to drop and then damage the Gear 14 .
4. Holding the Gear 14 , draw off the Shaft 14 that secures the P/H Assy (PL5.1.4) from the
printer using long-nose pliers.
5. Remove the Gear 14 from the printer.
Replacement
1. Align the the Gear 14 with its mount position to the printer.
2. Insert the Shaft 14 from the hole in the P/H Assy (PL5.1.4), and secure the Gear 14 to the
printer.
3. Mount the Chute MBF Assy (RRP 4.1.1).
4. Mount the Cover Front L/H (RRP 1.1.10).
5. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
10-123