Oki B6100 Technical Manual page 309

RRP 7.1.8 Chute Assy Exit(with 1-17,19-24)(Reference Only) continued
Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Cover Assy Rear (RRP 1.2.3).
4. Remove the Cover Assy I/F (RRP 1.1.2).
5. Remove the Cover Left (RRP 1.1.1).
6. Remove the Cover Assy Top (RRP 1.1.4).
7. Remove the Plate Assy left (RRP 9.1.1).
8. Remove the Cover Interlock (RRP 9.1.18).
9. Unplug the connctor (P/J31) from the PWBA HKB26 MCU (PL10.1.13).
10. Unplug the connctor (P/J32) from the PWBA HKB26 MCU .
11. Remove the three screw securing the Chute Assy Exit to the printer.
12. Remove the Chute Assy Exit from the printer.
Replacement
1. Align the Chute Assy Exit with it mount position to the printer.
2. Secure the Chute Assy Exit to the printer with three screws.
3. Plug the connector (P/J32) to the PWBA HKB26 MCU (PL 10.1.13).
4. Plug the connector (P/J31) to the PWBA HKB26 MCU .
5. Mount the Cover Interlock (RRP 9.1.18).
6. Mount the Plate Assy left (RRP 9.1.1).
7. Mount the Cover Assy Top (RRP 1.1.4).
8. Mount the Cover Left (RRP 1.1.1).
9. Mount the Cover Assy I/F (RRP 1.1.2).
10. Mount the Cover Assy Rear (RRP 1.2.3).
11. Mount the Cover Front L/H (RRP 1.1.10).
12. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
10-155