Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Cover Assy Rear (RRP 1.2.3).
4. Remove the Fuser Assy (RRP 6.1.3).
5. Remove the Cover Assy I/F (RRP 1.1.2).
6. Remove the Cover Left (RRP 1.1.1).
7. Remove the Cover Assy Top (RRP 1.1.4).
8. Remove the Cover Right (RRP 1.1.7).
9. Remove the Chute MBF Assy (RRP 4.1.1).
10. Remove the Shaft 14 (RRP 5.1.10).
11. Remove the Gear 14 (RRP 5.1.10).
12. Remove the P/H Assy (RRP 5.1.1).
13. Remove the Chute Trans Assy (RRP 6.1.2).
14. Remove the Plate Assy Left (RRP 9.1.1).
15. Remove the CRU Top Guide Assy (RRP 8.1.1)
16. Remove the Plate Handle (RRP 9.1.3).
17. Remove the PWBA HKB26 MCU (RRP 10.1.7).
18. Remove the Motor Assy Main (RRP 8.1.4)
19. Remove the PWBA HKB PS (RRP 10.1.9).
20. Remove the Feeder (RRP 3.1.10).
21. Remove the four screws securing the Gear Assy Drive to the printer.
22. Remove the Gear Assy Drive from the printer.
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
RRP 8.1.3 Gear Assy Drive (PL8.1.13) continued
Removal and Replacement Procedures (RRPs)
10-161