Oki B6100 Technical Manual page 361

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Cover Assy I/F (RRP 1.1.2).
4. Remove the Cover Left (RRP 1.1.1).
5. Remove the Cover Assy Top (RRP 1.1.4).
6. Remove the Plate Assy Left (RRP 9.1.1).
7. Remove the Plate Handle (RRP 9.1.3).
In the following steps, do not detach the Main Switch and the PWBA HKB PS
(PL10.1.17) far away because they are connected with the harness.
8. Remove the PWBA HKB Assy (RRP 10.1.9).
9. Push The rear of Main Switch so that it comes out of the front from the printer.
Replacement
Align the position exactly, mount the Main Switch on the printer with its ON side
up.
1. Align the Main Switch with it mount position to the printer.
2. Fit the Main Switch in the printer to secure.
3. Mount the PWBA HKB Assy (RRP 10.1.9).
4. Mount Plate Handle (RRP 9.1.3).
5. Mount the Plate Assy Left (RRP 9.1.1).
6. Mount the Cover Assy Top (RRP 1.1.4).
7. Mount the Cover Left (RRP 1.1.1).
8. Mount the Cover Assy I/F (RRP 1.1.2).
9. Mount the Cover Front L/H (RRP 1.1.10).
10. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 10.1.10 Main Switch (PL10.1.18) continued
10-207