Searching For Intelligent Multicast Sessions - Lucent Technologies Cajun P220 Operation Manual

2. Click Display/Configure Router Ports. The Router Port Display/Configuration
dialog box opens.
3. In the Static Router Port Configuration section, enter a port number in the
Port field.
4. In the VLAN column, click All to add this router port to all VLANs.
Or
From the VLAN pull-down menu, select a specific VLAN.
Note: When adding a router port to all VLANs, the router port is added only to the
5. Click CREATE to save your changes.

Searching for Intelligent Multicast Sessions

To perform a session search:
1. In the Intelligent Multicasting section of the Web Agent window, click Session
Search. The Intelligent Multicast Session Search dialog box opens.
2. Use Table 15-3 to configure your session search.
Parameter
IP Subnet
MAC Address
VLAN
Client Port
Session Type
3. Click SEARCH to begin the search for the multicast session. The Multicast Sessions
dialog box opens with the search results.
Cajun P550/P220 Switch Operation Guide
VLANs bound to the switch port. To bind multiple VLANs to a switch port,
refer to Chapter 3 in this guide.
Table 15-3. Intelligent Multicast Session Search Parameters
Display only multicast sessions...
With this IP subnet.
• IP Address - The destination IP multicast address portion of
the subnet on which to search.
• IP Address Mask - The subnet mask portion of the subnet on
which to search.
That have this destination MAC address (or portion of this MAC
address).
That are on this VLAN.
With a client port matching this switch port.
Of this session type.
• Learned - Session is dynamically learned.
• Mgmt - Session is configured statically by the user.
Managing Intelligent Multicasting (Layer 2 & Layer 3)
15-7