Displaying Mpls Operation; Displaying Mpls Ldp Operation - 3Com MSR 50 Series Configuration Manual

Displaying MPLS
Operation
Displaying MPLS LDP
Operation
To do...
Reset LDP sessions
Reset LDP at the protocol
level
To do...
Display information about a
specified or all interfaces
with MPLS enabled
Display information about
the ILM table
Display the status of the
specified or all labels
Display information about
LSPs
Display LSP statistics
Display information about
the NHLFE table
Display information about
static LSPs
Display information about
LSPs over specified or all
routes for the public or a
specified private network
Display MPLS statistics for a
specified or all LSPs
Display MPLS statistics for a
specified or all interfaces
Display information about
the MPLS fast forwarding
cache
To do...
Display information about
LDP
Display information about
LDP interfaces
Displaying and Maintaining MPLS
Use the command...
reset mpls ldp [ all |
[ vpn-instance
vpn-instance-name ] [ fec mask |
peer peer-id ] ]
graceful-restart mpls ldp
Use the command...
display mpls interface [ interface-type
interface-number ] [ verbose ]
display mpls ilm [ label ] [ include text ]
display mpls label { label-value1 [ to
label-value2 ] | all }
display mpls lsp [ { incoming-interface |
outgoing-interface } interface-type
interface-number ] [ in-label
in-label-value ] [ out-label out-label-value ]
[ { exclude | include } dest-addr
mask-length ] [ vpn-instance
vpn-instance-name ] [ asbr | protocol
{ bgp | bgp-ipv6 | crldp | ldp | rsvp-te |
static | static-cr } ] [ egress | ingress |
transit ] [ verbose ]
display mpls lsp statistics
display mpls nhlfe [ token ] [ include
text ]
display mpls static-lsp [ lsp-name
lsp-name ] [ { include | exclude } dest-addr
mask-length ] [ verbose ]
display mpls route-state [ vpn-instance
vpn-instance-name ] [ dest-addr
mask-length ]
display mpls statistics lsp { all | index |
lsp-name }
display mpls statistics interface
{ interface-type interface-number | all }
display mpls fast-forwarding cache
[ verbose ]
Use the command...
display mpls ldp [ all [ verbose ] [ | { begin |
exclude | include } regular-expression ] ]
display mpls ldp interface [ [ vpn-instance
vpn-instance-name ] [ interface-type
interface-number ] | all ] [ verbose ] [ |
{ begin | exclude | include }
regular-expression ]
1337
Remarks
Optional
Available in user view
Optional
Remarks
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Remarks
Available in any
view
Available in any
view