Planmeca ProMax 3D Max with ProTouch Technical Manual page 68

2 User interface
62 Planmeca ProMax 3D Max
2. Select the Mode (3400).
With the options in this display you can select between normal, test and
exhibition mode.
2.a. Select Set Normal Mode (3410) to activate the normal mode.
The normal mode enables the X-ray radiation and the computer
connection.
Accept or reject the mode change.
2.b. Select Set Test Mode (3420).
On this display you can select the test mode settings: enable/
disable connection between the X-ray unit and computer and
enable/disable X-ray radiation.
Accept or reject the mode change.
Technical manual