Log Management - Planmeca ProMax 3D Max with ProTouch Technical Manual

2.6.2 Log management

Steps
Technical manual
The X-ray unit's cephalostat (ProCeph) panel size. If not available
"n/a".
5. Select the Show Detailed Build Info.
In this view, even more detailed X-ray unit software build information is
listed.
6. Touch the green check mark button when ready.
1. Enter the technical settings menu.
See more in section "Entering technical settings menu" on page 51.
2. Select the Troubleshooting (3500) > Logger (3540).
3. On the Logger display, you can access a selection of logging options.
• Get ProMax log
Allows you to collect the current ProMax log.
GET LOG button: Collects the current log from the ProMax CPU
software, and displays it on the screen.
• Get ProTouch log
Allows you to check the previous user's touches and keystrokes on
the ProTouch interface.
GET LOG button: Collects and displays a specified number of logged
interface touches and keystrokes.
Max logged clicks: +/- buttons: Allow you to adjust the number of
interface touches and keystrokes the logger retrieves.
• Merge logs
Allows you to view a merged set of ProMax and ProTouch logs.
FROM PERIOD field: Allows you to specify the time from which the
log merge begins
Change period field: Opens a pop-up display in which you can
specify the log merge timeframe
MERGE LOGS button: Proceeds with the merge for the selected
timeframe above, and displays the merged log on the screen
• Logger options
2 User interface
Planmeca ProMax 3D Max 65