Technical Settings; Entering Technical Settings Menu; Configuring Unit Settings - Planmeca ProMax 3D Max with ProTouch Technical Manual

2.5 Technical settings

2.5.1 Entering technical settings menu

Steps

2.5.2 Configuring unit settings

Steps
Technical manual
• PlanLink Communication: Set the switch to ON to enable and to OFF to
disable the Clinic Management communication.
1. Touch the service spanner on the main display.
2. To enter the technical settings, touch the Technical tab.
The technical setting mode is password protected and the password
prompt displays when the mode is selected for the first time after
switching the unit on.
The password is 1701.
Technical settings main menu displays.
1. Enter the technical settings menu.
See more in section "Entering technical settings menu" on page 51.
2 User interface
Planmeca ProMax 3D Max 51