Network Settings (1400) - Planmeca ProMax 3D Max with ProTouch Technical Manual

2 User interface
Steps

2.3 Network settings (1400)

42 Planmeca ProMax 3D Max
1. Touch the service spanner on the main display.
The list of User displays appears.
2. To return to the Main display touch the service spanner again.
Select User --> 1400 Network Settings.
NOTE
The network settings are configured at the factory and normally you do not
have to change them.
NOTE
Changes to network settings do not save across the different pages
described below. Change one page at a time, and save between each edit
by pressing the check mark button.
Technical manual