Planmeca ProMax 3D Max with ProTouch Technical Manual page 70

2 User interface
64 Planmeca ProMax 3D Max
4. Select the Show Component Information.
In the view, the following component information is available.
• ProMax Type
The X-ray unit device type.
• Sensor Type
The X-ray unit's sensor type.
• ProMax Version
The X-ray unit software version.
• Unit Serial Number
The X-ray unit's serial number.
• ProTouch Hardware
The X-ray unit's ProTouch (touch screen) hardware version.
• GUI Software Version
The X-ray unit's ProTouch (touch screen) software version.
• CPU PCB Version
The X-ray unit's CPU version: CPU1-"VER REV" or CPU-XX
In case of new type CPU: e.g. CPU1-B3
In case of old type CPU: e.g. CPU-XX
(The old type CPU doesn't have the revision identification available
thus the type is presented always in format CPU-XX).
• CPU FPGA Version
The X-ray unit's CPU PCB FPGA version information. If not available
"n/a" (on CPU-XX).
• CAM FPGA Version
The X-ray unit's CAM FPGA version information.
• CBCT Sensor SW Version
The X-ray unit's CBCT sensor software version. If not available "n/a".
• CBCT Sensor HW
The X-ray unit's CBCT panel size. If not available "n/a".
• ProCeph Sensor SW Version
The X-ray unit's cephalostat (ProCeph) sensor software version. If
not available "N/A".
• ProCeph Sensor HW
Technical manual