Information Displays; Entering Additional Settings Menus - Planmeca ProMax 3D Max with ProTouch Technical Manual

2.2.3 Information displays

2.2.4 Entering additional settings menus

About this task
Technical manual
2. As soon as the screen displays text Touch the screen now to start
calibration, touch the screen. The calibration screen appears.
3. In the calibration screen, five calibration adjustment markers will appear
on the display, one at a time:
• 1st in the left up corner
• 2nd in the right up corner
• 3rd in the right bottom corner
• 4th in the left bottom corner
• 5th in the center of the display.
4. Touch the adjustment markers in the order they appear on the screen.
After touching the final adjustment marker, the X-ray unit will start up
normally.
CAUTION
Some of the settings can be used to alter the operation of the X-ray unit.
Never use functions that you are not familiar with.
NOTE
The options shown on the touch screen depend on the unit configuration.
The X-ray unit can be upgraded with new programs and features, contact
your dealer for further information. The views and values shown in this
manual are only examples.
NOTE
The illustrations shown on the touch screen are based on approximate
patient anatomy. The actual exposure area depends on the individual
anatomy of the patient.
NOTE
Never allow patients to touch the screen when they are positioned in the X-
ray unit. Touching the screen during exposure will stop the imaging process.
The X-ray unit has a number of additional functions for special requirements.
The function modes that can be entered without a password are: User
settings, Program control and About general information of the X-ray unit.
Technical settings are for the use of service personnel only and are
protected with a password.
In this manual, only the setting in the Technical menu and network settings
related menus are described, all other menus are described in the X-ray
unit's user's guide.
To enter the additonal settings menus, follow the steps below.
2 User interface
Planmeca ProMax 3D Max 41