Main Network Settings; Sensor Network Settings - Planmeca ProMax 3D Max with ProTouch Technical Manual
Hide thumbs
Also See for ProMax 3D Max with ProTouch:
- Technical manual (192 pages) ,
- User manual (66 pages)
Table of Contents
Advertisement
2.3.1 Main network settings
2.3.2 Sensor Network Settings
Technical manual
Select Main Network Settings.
•
ProMax IP: The Ethernet interface IP address, the default value is
10.0.0.1.
•
ProMax Control Port: Control port number, the default value is 5000.
•
ProMax MAC Address: MAC address is equipment related and cannot
be changed.
•
GUI IP: The GUI IP address, the default value is 10.0.0.10.
•
GUI MAC Address: MAC address is equipment related and cannot be
changed.
•
Netmask: Subnet mask, the default value is 255.255.255.0.
Select Sensor Network Settings.
•
IP: The sensor IP address, the default value is 10.0.0.2.
2 User interface
Planmeca ProMax 3D Max
43
Advertisement
Table of Contents
Need help?
Do you have a question about the ProMax 3D Max with ProTouch and is the answer not in the manual?
Questions and answers