Planmeca ProMax 3D Max with ProTouch Technical Manual page 138

5 Panoramic and 3D calibrations
132 Planmeca ProMax 3D Max
1. Attach the ball phantom to the patient support table.
The ball phantom (part number 30012440) is included in the X-ray unit
delivery.
NOTE
Ensure that the phantom is tightly attached to the patient support table.
2. In Planmeca Romexis, select 2D imaging --> Panoramic Exposure.
3. When the Waiting for Exposure window appears, press the X-ray unit's
exposure button.
CAUTION
Radiation is generated when the exposure button is pressed. Take
adequate protection measures.
Technical manual