Analog Devices ADuCM356 Reference Manual page 14

Reference Manual
CLOCKING ARCHITECTURE
To exit hibernate mode to switch back to using only the AFE clock,
use the following suggested sequence:
uiDummyRead = pADI_AFE->LPDACCON0;
read to wake-up AFE die
delay_10us(2000);
20mS
DigClkSel(DIGCLK_SOURCE_AFE);
UrtCfg(pADI_UART0,B57600,
itialize the UART
(BITM_UART_COMLCR_WLS|3),0);
figure UART for 57600 baud rate
printf("Digital Die clocked by AFE die's 16MHz
oscillator \r\n");
analog.com
// Dummy
// Wait
// Re-In►
// Con►
ADuCM356
Rev. A | 14 of 312