ABB IRB 7600 Product Manual page 90

2 Installation and commissioning
2.5.10 Installation of cooling fan for motors (option)
Continued
Cooling fan
The details of the cooling fan are shown in the figure below.
xx0500002158
A
B
C
D
Required equipment
Equipment
Cooling fan
Cabling cooling fan, axes 1
or 2.
Plate for customer connec-
tions
Additional cabling to and in-
side the controller
Material set fan axes 1 and
2
Cable harness inside control-
ler
Continues on next page
90
Fanbox
Attachment screws, fanbox plates (9 pcs)
Groove in the connector
Tightening screws, fanbox (3 pcs)
Article number
3HAC15374-1
3HAC023599-001
3HAC025778-001
-
3HAC023999-001
3HAC025488-001
© Copyright 2007 - 2023 ABB. All rights reserved.
Note
Choose this cabling if equipping the robot
with cooling fans on axis 1 or 2.
An additional connection plate must be
fitted to the robot base, if not already in-
stalled. The plate is shown in the figure
Plate for customer connections, at base
on page 91.
Specified in section Robot cabling and
connection points on page
The set includes:
• fan axes 1 & 2 cable harness
• plate, customer
• attachment screws and nuts.
Product manual - IRB 7600
3HAC022033-001 Revision: AH
109.