ABB IRB 7600 Product Manual page 196

3 Maintenance
3.6.2 Cleaning the IRB 7600
Continued
I
Instructions for steam or high pressure water cleaning
ABB robots with protection types Foundry Plus, Wash, or Foundry Prime can be
cleaned using a steam cleaner or high pressure water cleaner.
The following list defines the prerequisites:
Cables
Movable cables need to be able to move freely:
Cooling fans
Inspect the air supply inlet of the the motor cooling fans. Clean to remove any
contamination that could hinder the air supply.
2
See Cleaning methods on page 194
196
Position
Brake release buttons
Typical tap water pressure and flow
• Maximum water pressure at the nozzle: 2500 kN/m
• Fan jet nozzle should be used, min. 45° spread
• Minimum distance from nozzle to encapsulation: 0.4 meters
• Maximum water temperature: 80° C
• Remove waste material, such as sand, dust and chips, if it prevents cable
movement.
• Clean the cables if they have a crusty surface, for example from dry release
agents.
for exceptions.
© Copyright 2007 - 2023 ABB. All rights reserved.
Example of position
xx2300001625
(The illustration shows IRB6700)
2
Product manual - IRB 7600
3HAC022033-001 Revision: AH
2
(25 bar)