ABB IRB 7600 Product Manual page 142
Hide thumbs
Also See for IRB 7600:
- Product manual, spare parts (56 pages) ,
- Product manual (456 pages) ,
- Instructions manual (82 pages)
Table of Contents
Advertisement
3 Maintenance
3.3.7 Inspecting the oil level in axis-6 gearbox
Continued
8
9
10
11
142
Action
Inspect the oil level in the hole for the oil plug, filling
and inspection.
The oil should reach all the way up to the external
edge of the thread for the oil plug, filling and inspec-
tion.
Note
If the oil plug, draining is not opened, then use a
clean, narrow object, for example an oil stick or a
cable tie, to gently poke the oil surface. This will
avoid surface tension from stopping air to enter into
the gearbox.
Adjust the oil level, if required.
Refit the oil plugs.
WARNING
Do not mix oil types! If wrong oil is refilled, the
gearbox must be rinsed as detailed in Technical
reference manual - Lubrication in gearboxes.
© Copyright 2007 - 2023 ABB. All rights reserved.
Note
A
B
C
xx1400002786
A Oil plug hole
B Required oil level
C Gearbox oil
Where to find type of oil and total
amount is detailed in
Type and
amount of oil in gearboxes on
page
162.
Detailed in section
Changing oil,
axis-6 gearbox on page
181.
Tightening torque: 20 Nm
Product manual - IRB 7600
3HAC022033-001 Revision: AH
Advertisement
Table of Contents
