ABB IRB 7600 Product Manual page 153

2
3
Product manual - IRB 7600
3HAC022033-001 Revision: AH
Action
Inspect the axis-1 mechanical stop pin.
If the mechanical stop pin is bent or damaged, it
must be replaced.
Note
The expected life of gearboxes can be reduced
after collision with the mechanical stop.
Make sure the mechanical stop pin can move in
both directions.
© Copyright 2007 - 2023 ABB. All rights reserved.
3.3.10 Inspecting the axis-1 mechanical stop pin
Note
3 Maintenance
Continued
153