ABB IRB 7600 Product Manual page 285
Hide thumbs
Also See for IRB 7600:
- Product manual, spare parts (56 pages) ,
- Product manual (456 pages) ,
- Instructions manual (82 pages)
Table of Contents
Advertisement
2
Restoring the balancing device
1
2
3
4
Product manual - IRB 7600
3HAC022033-001 Revision: AH
Action
Pull the shaft out using the press equipment,
balancing device shaft, according to user in-
structions enclosed with the equipment.
xx0900000813
Go to the user instructions enclosed with the
press tool.
DANGER
Handling the tool incorrectly will cause serious
injury.
Read and follow enclosed user instructions for
the tool.
Action
Restore the balancing device according to in-
structions for the press equipment.
xx0900000813
Go to the user instructions enclosed with the
press tool.
DANGER
Handling the tool incorrectly will cause serious
injury.
Read and follow enclosed user instructions for
the tool.
Lubricate and refit the o-ring at the end of the
balancing device.
Refit the support shaft to the balancing device.
Lubricate and refit the o-ring on the support
shaft.
© Copyright 2007 - 2023 ABB. All rights reserved.
4.5.4 Replacing the balancing device
Note
Art. no. is specified in
equipment on page
282!
User instructions are enclosed with
the tool.
Note
Art. no. is specified in
equipment on page
282!
User instructions are enclosed with
the tool.
Make sure the o-ring is seated prop-
erly! Replace if damaged.
Make sure the o-ring is seated prop-
erly! Replace if damaged.
Continues on next page
4 Repair
Continued
Required
Required
285
Advertisement
Table of Contents
