Step 5: Access The Xlr Pro Web Configuration Interface; Connect An Xlr Pro To The Network - Digi XLR PRO Getting Started Manual

Step 5: Access the XLR PRO web configuration interface

This section describes how to access the XLR PRO web configuration interface to view or configure
XLR PRO options. For this demonstration, you need only one XLR PRO.

Connect an XLR PRO to the network

1 Follow the directions in
connection for one of the XLR PROs using XCTU.
2 Connect the XLR PRO to the network:
a Using a network cable, connect the XLR PRO to a network device.
b Allow the DHCP server to issue an IP address for the XLR PRO. This could take up to five
minutes.
3 Determine the XLR PRO IP address:
Using the serial XCTU connection, verify that an IP address has been assigned to the XLR PRO. The
MY option displays the IP address. Note the IP address assigned to the XLR PRO. You'll use the IP
address to access the XLR PRO web configuration interface.
XLR PRO Getting Started Guide
Step 3: Set up and test serial mode using XCTU on page 9 to set up a serial
16