Scriptinfoñdisplay A Summary Of Script Information - Nortel Meridian Meridian 1 Maintenance Manual

scriptinfoÑdisplay a summary of script information
This command applies to CCR only.
The scriptinfo command displays a complete list of scripts in the system, as
well as all status information concerning those scripts. The list provides the
following information:
¥ script nameÑname assigned to the script
¥ stateÑindicates whether the script is in the editing, validated, installed,
or associated state
¥ CDNsÑlist of CDNs associated with the script
¥ variablesÑlist of variables referenced by the script (if known)
¥ errorsÑlist of errors and warnings reported by the last validation of
the script
This command employs a viewer, which is started automatically by the
scriptinfo command.
Example:
maint> scriptinfo
Script Name:
State:
CDNs:
Variables:
Errors:
F=Find
Prev/U=Page up Next/D=Page down UpArrow/u=Up DownArrow/d=Down
The script state can have one of the following values:
¥ editingÑindicates that the file has been created but not validated
¥ validatedÑindicates that the file has been validated successfully
¥ installedÑindicates that the script has been installed successfully
¥ associatedÑindicates that there is an association for this script
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 2: Application Module commands 77
ALEX ATTEND
Associated
1111, 2144
alex acd
INFO:MIN/MAX STEPS BEFORE
CONTROL/TREATMENT: 2/51/1
N=Find Next X=Exit