Nortel Meridian Meridian 1 Maintenance Manual page 119

Table 4
Link parameters
Link parameter
X.25, TCP/IP, LAPB, and
ASYNC parameters:
Protocol*
Link type*
Machine ID
Delay
ASYNC only :
Port number
TCP/IP only
Port
X.25 and LAPB
parameters:
Port type*
Physical DTE/DCE
* Parameters marked with an asterisk (*) cannot be changed.
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 3: Link maintenance commands 107
Allowed values
(defaults in parentheses)
X25, LAN (for TCP/IP),
HDLC, ASYNC
1, 2, 3
(SL16)
(x25dest)
(Lanlink)
(MeridianMail)
(0)Ð9999
(tty03)
(3000)
X, H
0, 1
Ñ continued Ñ
Description
Link protocol used
Type of link (1 = Meridian Link,
2 = Host link, 3 = MML)
Logical name assigned to the
attached host
Maximum time (in seconds)
between packet transmissions
H = HDLC, X = X.25
0 if the AM or IPE Module port is
configured as DTE; 1 if the port
is configured as DCE (default)