Diagnostic procedure 8
Application terminal problem (continued)
8.5
Is the terminal
supported by CCR?
YES
Is the terminal
powered on?
YES
Terminal completes
its start-up self test?
YES
Go to
8.6
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
This procedure applies to CCR only.
NO
NO
NO
Chapter 4: Diagnosing faults 195
Replace the terminal
with an appropriate
terminal type. See
Note.
Connect the terminal
to a power source and
turn it on.
The terminal is
defective. Replace
the terminal.
Note: The supported
console terminal type is a
DEC VT220 or 100%
compatible terminal (for
example, a PC running
Reflection 4+).