Set Record - Nortel Meridian Meridian 1 Maintenance Manual

130 Chapter 3: Link maintenance commands
553-3211-510 Standard 1.0 October 1998
Figure 10
Example of a recording file
To : hlink (assoc id=2)
Message:
FF 0A 00 25 02 80 01 08 08 5E 30 08 00 08 35 30 30 36 31 08 00 08 35 30 31 31
35
03 70 2E 04 01 02 3F 04 01 08
To : hlink (assoc id=2)
Message:
FF 0A 00 19 02 00 00 08 0F 00 37 04 01 08 36 08 00 08 35 30 30 36 38 03 01
To : hlink (assoc id=2)
Message:
FF 0A 00 15 02 80 03 08 0C 07 30 08 00 00 35 30 30 36 71 03 00
From: hlink (assoc id=2)
Message:
FF 0A 00 12 02 00 01 08 09 FF 30 08 00 00 35 31 30 32

Set record

Use this command to add specified message types to the list of messages to
be recorded.
Command format:
mlusr> set record association_id message [message ...]
Example:
To set recording for two messages, makecall and calloffer, for association
ID 2:
mlusr> set record 2 0801 0807
or
mlusr> set record 2 mlmakecall mlcallofr
Set record successful
mlusr>
Wed May 20 20:42:04 1992
Progress
Wed May 20 20:42:04 1992
Status Change
Wed May 20 20:42:04 1992
Release Response
Wed May 20 20:42:05 1992
Answer