Meridian Link Call Processing Functions Fail - Nortel Meridian Meridian 1 Maintenance Manual

230 Chapter 4: Diagnosing faults

Meridian Link call processing functions fail

553-3211-510 Standard 1.0 October 1998
¥ 0506 indicates the Meridian 1 ID value specified in the
Application Registration message is not valid. The value must be
SL16 in ASCII format. Link 0 must also be configured on the
Application Module or IPE Module. To verify if link 0 is
configured, log in as mlusr and type the following
mlusr> get links
Press [Return]. The following display appears:
Link ID:
Link Type:
Machine ID:
Link ID:
Link Type:
Machine ID:
Link ID:
Link Type:
Machine ID:
If the entry for Link ID: 0 does not exist, see ÒAML (link 0) will
not establishÓ earlier in this chapter to diagnose the establishing of
link 0.
¥ 0507 indicates that the Service ID specified in the Application
Registration message is not available on the Meridian Link
software installed on the Application Module or IPE Module. The
possible Service ID values are 95, 96, 97, 98, 100 and 101.
If an applicationÕs attempts to control calls (for example, Make Call,
Release, Answer) at a DN fail, it is possible that the Meridian 1 database or
the application software is not configured correctly, or that the application
software is not equipped with the required packages.
Number of Links: 3
0
MSL-1 link
SL16
1
Host link
x25dest (or Lanlink)
2
MMail link
MeridianMail