Nortel Meridian Meridian 1 Maintenance Manual page 243

Check Meridian Link Module software option services
The application software tape lists the options or services purchased.
¥ Inbound and outbound call management (package 96)
This package cannot be ordered but will be supplied if packages 97
and 98 are both ordered (for compatibility with older host
applications). Service 96 may appear in the list of base services when
the showid command is issued.
¥ Inbound call management (package 97)
An application has access to all Application Module or IPE Module
messages except Make Call. That is, an application cannot originate an
outgoing call on behalf of a DN. Transfer and Conference of existing
calls are permitted.
¥ Outbound call management (package 98)
An application has access to all the Application Module messages
except Call Offered. That is, an application will not receive an
incoming Call Offered message when a call is terminated on an ACD
agent.
¥ Host Enhanced Routing (package 100)
This package supports the Route Request and Route Call messages,
giving the host application the ability to route incoming calls.
¥ Host Enhanced Voice Processing (package 101)
This service gives the host the ability to control Meridian Mail voice
ports for IVR (Interactive Voice Response) type applications. The host
is then able to acquire voice ports, receive notification of calls
presented to voice ports, answer such calls, play voice segments to the
caller, collect DTMF digits from the caller, release the call or transfer
it to another DN. New Meridian Link messages have been defined to
enable the host to use this functionality.
Check application registration
The application must register with the application software to gain access
to Application Module (AM) services.
¥ Log in as mlusr.
¥ Use the get associations command to display all the applications
currently registered with application software.
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 4: Diagnosing faults 231