Tapeinfoñdisplay Information On A System Tape - Nortel Meridian Meridian 1 Maintenance Manual

80 Chapter 2: Application Module commands
tapeinfoÑdisplay information on a system tape
553-3211-510 Standard 1.0 October 1998
This command applies to CCR only.
Once you insert the CCR application tape into the tape drive you can use
the tapeinfo command to display information about the software before
installing it on your system.
Example:
maint> tapeinfo
Insert the desired tape into the drive, lock it into position,
then hit <return> after the drive light comes on and goes off. <cr>
Extracting information from the tape...
Media Information
------------------------
Package Name - CCR
Volume Description - Customer Controlled Routing
Version - R03.08
Creation Date - Wed Dec 1 11:55:46 1993
maint>