Read Linkctl - Nortel Meridian Meridian 1 Maintenance Manual

100 Chapter 3: Link maintenance commands

read linkctl

553-3211-510 Standard 1.0 October 1998
To use this command, you must specify the name of the link control file
(from the /usr/mlusr/conf directory). You are prompted to accept or reject
the new configuration.
Command format:
mlusr> read linkctl filename
Note: The file name should follow a slash character; for example,
/hdlcmlnk.data.
Example:
mlusr> read linkctl /hdlcmlnk.data
New Control File Image:
0 HDLC
Confirm? (yes or no): y
mlusr>
/usr/mlusr/conf/hdlcmlnk.data