Nortel Meridian Meridian 1 Maintenance Manual page 465

Procedure 22: Load the application software from tape (continued)
Figure 146
Reboot messages 2
Copyright Motorola Inc. 1988 - 1992, All Rights Reserved
M4120 Debugger/Diagnostics Release Version 1.1 - 09/30/92 (IR01)
COLD Start
Local Memory Found =01000000 (&16777216)
MPU Clock Speed =25Mhz
Autoboot in progress... To abort hit <BREAK>
Booting from: M4120, Controller 0, Drive 0
Loading: Operating System
.
.
Initializing For Applications
Configure Link 0 : successful
Enable Link 0 : successful
Application release successful
Starting Applications
06/01/94 20:55:53 Starting CCR Application...
Starting Customer Controlled Routing Processes...
Performing modem reset...
Connected
Sending atz
to the device.
Done modem reset.
The system is ready.
Console Login:
26 Remove the application tape from the cassette tape drive.
The appearance of the ÒConsole Login:Ó prompt indicates that the
new application software is now installed. You may now log in to the
system to perform other commands. You may also restore
configuration files and data files from backup if necessary
(Procedure 24: Restore configuration files and data files from the
backup tape).
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 8: Recovery/replacement procedures 453
(diagnostic messages)