Filedeleteñdelete A File - Nortel Meridian Meridian 1 Maintenance Manual

filedeleteÑdelete a file
This command allows you to select files and then delete them.
Example:
maint>filedelete
(The screen clears and a list of files appears.)
1. /usr/lib/api_headers/ambase_api.h
2. /usr/lib/api_headers/api_nwk_if.h
3. /usr/lib/hp/ambase_api.a
4. /usr/lib/hp/rose_ts.a
5. /usr/lib/hp/rtp.a
6. /usr/lib/hp/system.0
7. /usr/lib/hp/upper.a
8. /usr/lib/mot/ambase_api.a
9. /usr/lib/mot/rose_ts.a
10. /usr/lib/mot/rtp.a
11. /usr/lib/mot/system.0
12. /usr/lib/mot/upper.a
13. /usr/maint/logs/SysLog.old
Make a selection/deselection by entering the desired value:
You can select a group of files to delete. To select a file for deletion, type
the number corresponding to the file and press [Return]. An asterisk (*)
appears beside the entry. You may continue selecting files by entering
numbers and pressing [Return].
When you have selected all the files you wish to delete, press [Return]
again. Assuming that you have selected file 2 only, the following prompts
appear:
Do you want to confirm each file before deleting? [y,n] y
Do you want to delete /usr/lib/api_headers/api_nwk_if.h? [y,n] y
maint>
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 2: Application Module commands 49