50 Chapter 2: Application Module commands
fileverifÑverify system files
553-3211-510 Standard 1.0 October 1998
Use this command to verify that the correct application files
¥
are present
¥
are the proper size
¥
have proper ownership and permissions
¥
are structurally correct (for dynamic data files)
If the fileverif command indicates that files are missing or are present but
not the correct size, there may be problems on your system. Contact your
support representative for assistance with this condition.
Example:
maint> fileverif
FILE VERIFICATION AS OF 05/20/92 13:46:10
(Pause)
Static file verification found everything to be in order.
(Pause)
Permissions and ownership tests found everything in order.
(Pause)
Structural verification found main data files to be in order.
(Pause)
maint>