Nortel Meridian Meridian 1 Maintenance Manual page 447

Procedure 21: Reboot and go through setup (continued)
Figure 104
Portconfig messages
-----------------------------------------------
Found a vme332xt driver entry in /usr/src/uts/m68k/cf/master (major # 34)
Found a configured board (board 0)
Removing existing /dev/tty entries for module 1
rm -f /dev/tty1[0123456789]
Making tty entries for board 0
Ports appear on backpanel module 1/dev:
tty11 tty12 tty13 tty14 tty15 tty16 tty17 tty18 tty19
Adding m332xt Controller board 1 associated entries to /etc/inittab.
-----------------------------------------------
Found a m564 driver entry in /usr/src/uts/m68k/cf/master (major # 40)
-----------------------------------------------
Found a z8530 driver entry in /usr/src/uts/m68k/cf/master (major # 33)
Found a configured board (board 0)
-----------------------------------------------
Found a m681con driver entry in /usr/src/uts/m68k/cf/master (major # 42)
-----------------------------------------------
Found a c240con driver entry in /usr/src/uts/m68k/cf/master (major # 45)
Adding MVME167 Controller board associated entries to /etc/inittab.
----------------------------------------------
Removing /dev/tty entries for non-configured back panel modules:
rm -f /dev/tty2[123456789]
rm -f /dev/tty3[123456789]
rm -f /dev/tty4[123456789]
rm -f /dev/tty5[123456789]
rm -f /dev/tty6[123456789]
rm -f /dev/tty7[123456789]
rm -f /dev/tty8[123456789]
rm -f /dev/tty9[123456789]
----------------------------------------------
Use Ôsysadm ttymgmtÕ to turn these entries on in /etc/inittab
Current back panel layout should be as follows:
712/147 1437/332xt
_________
| _ _ |
| | | | | |
| | | | | |
| |_| |_| |
| tty cons|
| 02 |
| _ _ |
| | | | | |
| | | | | |
| |_| |_| |
| tty tty |
| 03 01 |
| _ _ |
| | | | | |
| |_| | | |
|ether|_| |
| net |
| _ |
| _ | | |
| | | | | |
| | | | | |
| |_| |_| |
| pr SCSI|
|_________|
#
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 8: Recovery/replacement procedures 435