Association Services Commands; Get Associations - Nortel Meridian Meridian 1 Maintenance Manual

120 Chapter 3: Link maintenance commands

Association services commands

get associations

553-3211-510 Standard 1.0 October 1998
These commands provide information covering application associations
currently established on the Application Module or IPE Module.
This command displays information on current active associations. The
mlusr association is always shown with an application ID of ADMIN.nnnn,
where nnnn is a number. The association ID, displayed for each association
by invoking this command, is used in the association services commands
(described in the following pages).
Command format:
mlusr> get associations
Example:
mlusr> get associations
Association ID:
Application ID
Host Link ID:
Meridian 1 Link ID:
Meridian 1 Customer Number: NONE
Meridian Mail Link ID:
Registered Services:
Association ID:
Application ID
Host Link ID:
Host Name:
Meridian 1 Link ID:
Meridian 1 Name:
Meridian 1 Customer Number: 1
Meridian Mail Link ID:
Meridian Mail Name:
Registered Services:
mlusr>
1
ADMIN.1334
NONE
NONE
NONE
1
2
API_TOOL
1
X25dest
0
SL16
2
Meridian Mail
97 98 100 101