150 Chapter 3: Link maintenance commands
File viewing commands
view
553-3211-510 Standard 1.0 October 1998
Two commands are provided for viewing files: view and viewlog.
This command enables you to choose a set of log, trace, or record files and
to display the set. Trace and record files are described earlier in this
chapter, and the SysLog file is described in Chapter 5, ÒApplication
Module and IPE Module error messages.Ó
This command is identical to the view command in maint.
Command format:
mlusr> view
Example:
mlusr> view
1. Oct_12_93.0001
2. REVERSE: Oct_12_93.0001
3. Oct_13_93.0002
4. REVERSE: Oct_13_93.0002
5. Oct_13_93.0003
6. REVERSE: Oct_13_93.0003
7. Oct_13_93.0004
8. REVERSE: Oct_13_93.0004
Make a selection/deselection by entering the desired value:
Type the number corresponding to the file you wish to display and press
[Return]. An asterisk (*) will appear beside the entry. You may continue
selecting files (they will be displayed as a continuous file, each file with the
next appended to it) by typing numbers and pressing [Return].
When you have selected all the files you wish to display at one time, press
[Return] again. Your screen displays the contents of the files you selected.