Viewñdisplay Syslog And Link-Related Files - Nortel Meridian Meridian 1 Maintenance Manual

84 Chapter 2: Application Module commands
viewÑdisplay SysLog and link-related files
553-3211-510 Standard 1.0 October 1998
This command enables you to choose a set of log, trace, or record files and
display the set. Trace and record files are described in Chapter 3, ÒLink
maintenance commands.Ó Contents of the SysLog file are described in
Chapter 5, ÒApplication Module and IPE Module error messages.Ó
Example:
maint> view
1. Oct_12_93.0001
2. REVERSE: Oct_12_93.0001
3. Oct_13_93.0002
4. REVERSE: Oct_13_93.0002
5. Oct_13_93.0003
6. REVERSE: Oct_13_93.0003
7. Oct_13_93.0004
8. REVERSE: Oct_13_93.0004
9. Oct_13_93.0005
10. REVERSE: Oct_13_93.0005
11. Oct_13_93.0006
12. REVERSE: Oct_13_93.0005
13. Oct_13_93.0007
14. REVERSE: Oct_13_93.0007
15. Oct_13_93.0008
16. REVERSE: Oct_13_93.0008
17. Oct_13_93.0009
18. REVERSE: Oct_13_93.0009
19. Oct_13_93.0010
20. REVERSE: Oct_13_93.0010
21. Oct_13_93.0011
Make a selection/deselection by entering the desired value:
Type the number corresponding to the file you wish to display and press
[Return]. To display the SysLog file, scroll down to the bottom of the list,
note the number corresponding to the file and press [Return]. An asterisk
(*) appears beside the entry and a display file is created that contains the
selected file. As you continue to select files, they are appended to the
display file.