Nortel Meridian Meridian 1 Maintenance Manual page 270

258 Chapter 5: Application Module and IPE Module error messages
Table 8
mlusr messages that appear on the console and SysLog files
Message
Exiting mlusr: Function
ts_block call to fcntl()
failed
Exiting mlusr: Function
ts_unblock call to
fcntl() failed
mlusr:
async_lnk_config_str,
malloc failed
Exiting mlusr: unable
to allocate memory
AM Base software not
responding:
mlusr/admin unable to
register. Is Meridian
Link/AM Base software
installed and running?
Reboot the system to
recover.
mlusr: Unknown
message received
<main type> <sub
type>
553-3211-510 Standard 1.0 October 1998
Display Description
SysLog file Indicates setting to blocked I/O failed. This
message is normally seen during issuing a mlusr
command. After this message is displayed, the
user is exited out of mlusr.
SysLog file Indicates setting to non-blocked I/O failed. This
message is normally seen at the end of
executing a command. After this message is
displayed, the user is exited out of mlusr.
SysLog file There is a problem in allocating memory space
when composing a configuration message to an
asynchronous link (the Meridian Mail Link). This
causes failure in configuring the asynchronous
link.
SysLog file Indicates a memory allocation for I/O buffers, or
for message reference ID storage, has failed.
This will affect mlusrÕs functioning. The solution
is to restart mlusr.
Console Indicates that AM Base software (normally
referred to as tsmain process) failed to respond
to mlusr. The solution is to reboot the system.
SysLog file Indicates that mlusr received an invalid
message. The main type and subtype of the
message is also recorded.
Ñ continued Ñ