368 Chapter 8: Recovery/replacement procedures
Procedure 2: SBC restart
553-3211-510 Standard 1.0 October 1998
1
Log in as maint. The default password is maint.
2
At the Òmaint>Ó prompt, type powerdown and press [Return].
The following messages appear:
Figure 17
Powerdown notification message screen 1
Would you like to power down or reboot?
Powering down allows you to turn the system off.
Rebooting will automatically restart the system.
Enter p to power down, r to reboot, or q to quit:
3
Type r and press [Return] to confirm that you wish to reboot.
The following messages appear:
Figure 18
Powerdown notification message screen 2
Running subcommand 'reboot' from menu 'machinemgmt',
MACHINE MANAGEMENT
Note: If more than one user is logged into the system, a list of the
logged in users will appear on the screen.
Users currently logged in:
disttech
console
root
tty01
Once started, a reboot CANNOT BE STOPPED.
Do you want to start an express reboot? [y, n, ?, q]
4
You are prompted to start an express reboot. Type y and press
[Return].
If you wish to alert all users currently logged into the system of the
reboot, type n and press [Return]. Then you are prompted to enter
the number of seconds the system should wait after the warning
message. Type the number of seconds that will allow the users to
save their work and log off. Then press [Return].
The information shown in Figure 19 appears on the screen.
Oct 26 13:38
Oct 25 21:20