Installing The Chassis System; Contents; Summary Of Installation Procedures - Nortel Meridian 1 Succession 1000M Installation And Configuration Manual

Installing the Chassis system

Contents

Summary of installation procedures

This section contains information on the following topics:
Summary of installation procedures . . . . . . . . . . . . . . . . . . . . . . . . . . .
The following list provides a high-level summary of installation procedures
for the Succession 1000M Chassis or Meridian 1 Option 11C Chassis. Where
applicable, the summary contains references to chapters that describe the
procedures in more detail.
Note: For a Succession 1000M Chassis system, install the Succession
Signaling Server. Refer to Signaling Server: Installation and
Configuration (553-3001-212) for instructions.
1 Read the safety instructions in "Important safety instructions" on
page 73.
2 Make sure that you have read and completed the instructions contained
in the planning chapters of Small System: Planning and Engineering
(553-3011-120).
3 Make sure that system and site requirements have been met. See Small
System: Planning and Engineering (553-3011-120).
4 Make sure that you have created the equipment layout plan and card slot
assignment plan. See Small System: Planning and Engineering
(553-3011-120).
Small System Installation and Configuration
Page 107 of 562
107