Stale Association; Removing A Stale Mlusr Association - Nortel Meridian Meridian 1 Maintenance Manual

300 Chapter 6: Link error messages

Stale association

Removing a stale mlusr association

553-3211-510 Standard 1.0 October 1998
Associations that terminate before releasing their registered association are
considered stale. Because the Meridian Link Module allows a maximum of
sixteen registered associations, stale associations should be removed. Stale
associations can be removed if the failed application recovers to the point
of being able to release itself, or if the module is rebooted.
If a dial-up mlusr session disconnects before normal termination, a
stale mlusr association will be left registered. A stale mlusr association
can be removed (without Meridian Link Module restart) only if the
application ID for that association is known.
If the Association Table is not full, a stale mlusr association can be
released only in the following manner:
Console login: mlusr
Password:
Application registration successful: id = 2
mlusr> get associations
Association ID:
Application ID
Host Link ID:
Meridian 1 Link ID:
Meridian Customer Number:
Meridian Mail Link ID:
Registered Services:
Association ID:
Application ID
Host Link ID:
Host Name:
Meridian 1 Link ID:
Meridian 1 Name:
Meridian 1 Customer Number: 1
Meridian Mail Link ID:
Meridian Mail Name:
Registered Services:
1
ADMIN.1334
NONE
NONE
NONE
NONE
1
2
API_TOOL
1
X25dest (or Lanlink)
0
SL16
2
Meridian Mail
97 98 100 101