Nortel Meridian Meridian 1 Maintenance Manual page 253

Table 6
Application messages that appear on the console (continued)
Message
msgsnd ÔUNIX error msgÕ
tsasctbl: init_assoc_tbl: shmget( )
ÔUNIX error msgÕ
tsdntbl: init_dn_rout_tbl:
shmget(Ê) ÔUNIX error msgÕ
tslnktbl: init_link_tbl: shmget( )
ÔUNIX error msgÕ
tslnktbl: init_link_tbl: shmget( )
ÔUNIX error msgÕ
tsmsgio: set_up_ipc:
msgget(Q_TSMAIN_KEY,
0666|IPC_CREAT) ÔUNIX error
msgÕ
tsmsgio: set_up_ipc:
msgget(Q_MLINK_KEY,
0666|IPC_CREAT) ÔUNIX error
msgÕ
tsmsgio: set_up_ipc:
msgget(Q_HLINK_KEY,
0666|IPC_CREAT) ÔUNIX error
msgÕ
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 5: Application Module and IPE Module error messages 241
Description
If the ÔUNIX error msgÕ is Ôno more processes,Õ the
application is losing messages due to excessive
activities (console message monitoring, message
tracing, and so on) during heavy message traffic
periods. Turn off any unnecessary activities during
high traffic periods.
Otherwise, there is an internal application problem.
Use Procedure 2: SBC restart.
Indicates an internal application problem. Use
Procedure 2: SBC restart.
Indicates an internal application problem. Use
Procedure 2: SBC restart.
Indicates an internal application problem. Use
Procedure 2: SBC restart.
Indicates an internal application problem. Use
Procedure 2: SBC restart.
Indicates an internal application problem. Use
Procedure 2: SBC restart.
Indicates an internal application problem. Use
Procedure 2: SBC restart.
Indicates an internal application problem. Use
Procedure 2: SBC restart.
Ñ continued Ñ