Nortel Meridian Meridian 1 Maintenance Manual page 204

Application module and intelligent peripheral equipment module meridian link release 5c/ccr release 3c diagnostic and maintenance guide
Hide thumbs Also See for Meridian Meridian 1:
Table of Contents

Advertisement

192
Chapter 4: Diagnosing faults
Diagnostic procedure 8
Application terminal problem (continued)
8.2
Is the terminal
connected through
a modem?
Is the modem
powered on?
Go to
8.3
553-3211-510 Standard 1.0 October 1998
This procedure applies to CCR only.
NO
VT220-compatible
YES
NO
Connect the modem
to a power source.
Verify correct modem
start-up. See Note.
YES
Note: Refer to the modem
vendorÕs documentation and
the Meridian Link/Customer
Controlled Routing Installation
and Upgrade Guide
(553-3202-210) for any
specific modem setup
information.
Is the terminal a
ASCII terminal?
YES
Go to
8.5
NO
Is the terminal a
PC running
Reflection 4+?
YES
Go to
8.7
Verify that the modem
is set up correctly and
compatible with the
other modem.
If the terminal still
does not work
correctly, replace the
modem.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Meridian 1

Table of Contents