234
Chapter 4: Diagnosing faults
553-3211-510 Standard 1.0 October 1998
Check application and DN registration
The application must register with the application software to gain access
to the application services.
¥
Log in as mlusr.
¥
Use the get associations command to display all the applications and
their association IDs.
¥
If the application software does not display any information related to
applications on the system console other than ÒADMIN Application,Ó
the application is not registered. An application must be registered
before it can register DNs associated with that application.
¥
If the application software displays information related to application
registrations, use the get dn command to display the DNs registered
with that application.
Because Meridian Link software handles multiple applications
simultaneously, unsolicited messages from the Meridian 1 to the
application software must be routed to the applications that have registered
for the DN. If the application is not registered for the DN, the Application
Module or IPE Module cannot route the message.