Nortel Meridian Meridian 1 Maintenance Manual page 330

318 Chapter 7: CCR log file messages
553-3211-510 Standard 1.0 October 1998
1020
Log message
None
Parameters
No CCR package was installed. The system profile has
Description
been corrupted and/or the installation was not performed properly.
Use the version command to verify the CCR package
Recovery
installed. Reinstall the CCR package.
1021
Log message
None
Parameters
The compiler has problems interpreting the math
Description
expression portion of the script.
The script is not compiled due to the internal compiler
Impact
problem.
Reduce and simplify the number of intrinsics or variables
Recovery
in the math expression. If it persists, contact NT support personnel.
2001
Log message
Cause 1, 2, 3, 4, 5, or 6; Message Type; and Procedure
Parameters
where the error occurred.
1: Invalid message from user session software to Call Processing
2: Unused
3: Invalid Message from Meridian 1 to Call Processing
4: Invalid message from Call Processing to the system manager
5: Invalid message from the user session to the system manager
6: Invalid message from the system manager to the user session
An unknown message type was received from the
Description
software. The occurrence could point to a software error,
synchronization problem, or packaging mismatch.
There is no impact. The system ignores the event.
Impact
No direct recovery is necessary since the software ignores
Recovery
the event.
CCR process halted due to invalid packaging.
Internal compiler error.
An invalid message was received.