Nortel Meridian Meridian 1 Maintenance Manual page 342

330 Chapter 7: CCR log file messages
553-3211-510 Standard 1.0 October 1998
2015
Log message
operation aborted
User ID, Process ID, Lock Type, Error Status, and
Parameters
Procedure where the error occurred
The software was trying to delete a specified user session
Description
entry from the list of existing user sessions, but failed. This can happen
during restart or midnight routines, or when a user logs out of the
application.
This does not affect normal software operation unless coupled
Impact
with a memory shortage or file open/close error from the reported error
status.
No recovery is required unless there is also a memory
Recovery
shortage or file open/close error, or unless the problem persists. If
there is a memory shortage error, log out all unnecessary user sessions.
If there is a file open/close failure, check the integrity of the file
system using the fileverif command. If the problem persists, restart the
application.
2016
Fail to write script state in the script list: operation
Log message
aborted
Script Name, Script State, [Process ID, Action Type,
Parameters
Cause], Error Status, and Procedure where the error occurred
This may happen during system shutdown, midnight
Description
routines, or when a user session is manipulating script files (editing,
validating, or installing, for example).
This has no impact on normal software operation unless there
Impact
is a shortage of memory or a file open/close error, indicated by the
error status parameter.
The software aborts the transaction automatically. Contact
Recovery
your Nortel support personnel.
Fail to delete session entry from user session list: