34 Chapter 2: Application Module commands
bootconfigÑdisplay and modify boot configuration
553-3211-510 Standard 1.0 October 1998
This command applies to CCR only.
You can configure the application for automatic reboot when the system
boots. By default, the software application starts automatically whenever
the Application Module or IPE Module restarts.
Example: enabling auto-start
maint> bootconfig
Application is not configured to start when the system boots
Do you want to enable starting application? [y,n] y
Auto start enabled
maint>
Example: disabling auto-start
maint> bootconfig
Application is configured to start when the system boots
Do you want to disable starting the application? [y,n] y
Auto start disabled
maint>