Chapter 6: Link error messages
Link maintenance commands fail
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
This chapter describes error messages that you might see when using link
maintenance commands or when using diagnostic tools such as the
continuity test and loopback test. If you see an error message that is not
described in this guide, contact your Nortel support personnel for
assistance.
Link maintenance commands can fail for either syntax or functional
reasons. Syntax errors include the omission of required parameters in the
command line, and unrecognized commands. Examples of invalid
commands and their responses include
mlusr> display link
Link Number Missing
mlusr> read linkctl
File Name Needed
mlusr> get
Incomplete Command
mlusr> change
Incomplete Command
mlusr> change link
Link Number Missing
mlusr> trace
Incomplete Command
291